Liquid Chromatography

1100 LC Supplies
Pump Module Supplies
Description	Part #
Maintenance kit with outlet cap, PTFE frits (10), pump	G1311-68710
Sapphire plunger	5063-6586
Plunger seals (2/pk), graphite-filled Teflon	5063-6589
Plunger seals (2/pk), polyethylene for normal phase	0905-1420
PTFE frits (5/pk)	01018-22707
Outlet valve for isocratic and quaternary pump	G1311-60012
Outlet valve for binary pump	G1312-60012
Gold seal outlet	5001-3707
Seal wash	0905-1175
Sieves (SS) for outlet valve (10/pk)	5063-6505
Cartridge for active inlet valve	5062-8562
Seal wash kit	01018-68722
Glass filter, solvent inlet	5041-2168
Frit adapter, 3 mm, PTFE, 4/pk	5062-8517
Solvent reservoir, 1 liter with cap	9301-1421
Solvent reservoir, 2 L, 2 inlets, clear	5065-4421
Solvent tubing, 5 m, 1.5 mm id, 3 mm od	5062-2483
Online Degasser Supplies
Online degasser accessory kit with screws (8),	G1322-68705
Pump Supplies
Description	Part #
PM Kit for isocratic/quaternary pump includes piston seal, PTFE frits, 2 gold seals and 2 outlet caps	G1310-68730
PM Kit for binary pump includes 4 piston seals, PTFE frits, 3 gold seals, 2 sieves and 3 outlet caps	G1312-68730
Capillary System for 0.12 mm ID use Contains the necessary 0.12 mm ID capillaries and heat exchangers to optimize a 1200 Series LC system for low dispersion operation.	G1316-68744
Capillary kit micro column regeneration
Contains capillaries and fittings for use with 10 port micro valve, 600 bar	G1316-68721
Sapphire Piston	5063-6586
Piston Seals, graphite filled Teflon (reversed phase), 2/pk	5063-6589
Piston Seals, polyethylene (normal phase), 2/pk	0905-1420
PTFE Frits, 5/pk	01018-22707
Outlet ball valve, (quaternary, isocratic)	G1311-60012
Outlet ball valve for binary pump, 400 bar	G1312-60012
Outlet valve for binary SL pump, 600 bar	G1312-60022
Gold seal, outlet	5001-3707
Wash seal	0905-1175
Binary pump outlet valve SS sieve	5063-6505
Cartridge for active inlet valve, 400 bar	5062-8562
Cartridge for active inlet valve, 600 bar	G1312-60020
Glass filter, solvent inlet, 20 μm	5041-2168
Filter frit adapter, 3 mm, 4/pk	5062-8517
Solvent reservoir, 1 liter with cap	9301-1421
Solvent bottle, clear, 2 liter, 2 inlets	5065-4421
Teflon Solvent tubing, 5 m, 1.5 mm ID, 3 mm OD	5062-2483
Autosampler Supplies
Description	Part #
PM Kit for standard autosamplers includes Vespel rotor seal, standard needle seat and needle	G1313-68730
PM Kit for well plate autosamplers includes Vespel rotor seal, needle, needle seat, peristaltic pump cartridge and seal tight nut	G1367-68730
Multidraw Upgrade Kit for G1313A/G1327A/G1329A Autosamplers
Includes 500 μl capillary, 1500 μl capillary, and ZDV union	G1313-68711
Rotor seal, Vespel for G1367B, 400 bar	0100-1853
Rotor seal, PEEK, 2-groove for G1367B, 400 bar	0100-2231
Rotor seal, 3 grooves, max 600 bar	0101-1416
Stator for 6 port switch valve, 600 bar for injection valve of 1200 Series high performance ALS	0101-1417
Vial kit, crimp top vials, caps and septa, 500/pk	5181-3400
11 mm aluminum crimp cap with butyl rubber septa, 500/pk	5061-3370
Screw cap vial, clear, 6ml, 100/pk	9301-1377
Screw caps for 6 ml vials, 100/pk	9301-1379
Septa for 6ml screw cap vials, 100/pk	9301-1378
PTFE/silicone septa, pre-slit, 16 mm, 100/pk	5188-2758
Crimp cap vial, clear, 6ml, 20 mm cap size, 100/pk	9301-1419
Crimp caps, PTFE/silicone septa, 20 mm, 100/pk	9301-1425
PTFE/silicone septa, pre-slit, 16 mm, 100/pk	5188-2758
Crimp top micro vial with fixed insert , 100/pk	9301-1388
Narrow neck vial, 2ml, clear, 100/pk	5182-0538
Narrow neck inserts, 500/pk	9301-1387
Connecting Capillaries and Fitting Kits
Description	Part #
Capillary/fitting starter kit, 0.18 mm ID Contains 0.17 mm ID SS flex capillaries: 4x10 cm, 4x15 cm, 2x20cm, 2x28 cm, 1x40 cm, PEEK tubing, cutter, SS and PEEK fittings, unions, Rheotool, knife	5065-9939
Capillary/fitting starter kit, 0.12 mm ID Contains 0.12 mm ID SS Flex Capillaries: 4x10 cm, 4x15 cm, 2x20 cm, 2x28 cm, 1x40 cm, PEEK tubing, cutter, SS and PEEK fittings, unions, Rheotool, knife	5065-9937
Capillary/fitting starter kit
Contains 8 PEEK coated fused silica connecting capillaries of different lengths, 50 and 100 μm ID, fittings for use with the 1100 cap LC, 20 μl/min	5065-9938
Biocompatibility kit
Contains PEEK capillaries, PTFE solvent inlet filter, PEEK union, PEEK needle seat and needle,  PEEK fittings	5065-9972
Column connecting capillary with fittings, 9 cm, 0.17 mm ID, 1/16 in. male/male	G1316-87300
Column connecting capillary with fittings, 18 cm, 0.17 mm ID, 1/16 in. male/male	G1313-87305
Column connecting capillary with fittings, 7 cm, 0.12 mm ID, 1/16 in. male/male	G1316-87303
Column connecting capillary with fittings, 18 cm, 0.12 mm ID, 1/16 in. male/male	G1313-87304
Column connecting capillary with fittings, 39 cm, 0.17 mm ID, 1/16 in. male/male	G1315-87311
Column connecting capillary with fittings, 60 cm, 0.17 mm ID	G1312-67305
1/16 in. SS fittings, front and back ferrules, 10/pk	5062-2418
1/16 in. SS long fittings, front and back ferrules, 10/pk	5065-4454
Finger-tight PEEK fittings, 1/16 in., beige, 10/pk	5063-6591
Finger-tight PEEK fittings, 1/16 in., colored, 10/pk	5065-4426
Finger-tight polyketone fittings, 1/16 in., max pressure 600 bar, 10/pk	5042-8957
Flexible SS tubing, 105 mm, 0.17 mm ID, Without fittings	5021-1816
Flexible SS tubing, 150 mm, 0.17 mm ID, Without fittings	5021-1817
Flexible SS tubing, 105 mm, 0.12 mm ID, Without fittings	5021-1820
Flexible SS tubing, 150 mm, 0.12 mm ID, Without fittings	5021-1821
ZDV union, with fittings	0100-0900
Trays and Collecting Tubes for Fraction Collector
Description	Part #
96 Well plates, 0.5 mL, polypropylene, 120/pk	5042-1385
96 Well plates, 0.5 mL, polypropylene, 10/pk	5042-1386
96 Well Plates, 150 μl, conical, polypropylene, 25/pk	5042-8502
96 Deep well plates, 1 mL, polypropylene, 50/pk	5042-6454
384 Well plates, 90 μL, polypropylene, 30/pk	5042-1388
96 deep well collection plates with glass inserts, caps, and septa, pre-assembled, 0.35 mL	5065-4402
Closing mats for 96 well plates, silicone, 50/pk	5042-1389
Tray holding 40 tubes, 30 x 100 mm, 50 mL	G1364-84523
Round bottom glass vial, 30 x 100 mm, 100/pk	5042-6458
Round bottom glass vial, 30 x 48 mm, 100/pk	5042-6470
Tray holding 60 tubes, 25 x 100 mm, 35 mL	G1364-84524
Round bottom glass vial 25x100mm 100/PK, 100/pk	5042-6459
Tray holding 126 tubes, 16 x 100 mm, 14 mL	G1364-84525
Test tubes, 16 x 100 mm, 250/pk	5022-6532
Test tubes, 16 x 48 mm, 100/pk	5022-6533
Test tubes, 12 x 100 mm, 250/pk	5022-6531
Test tubes, 12 x 48 mm, 100/pk	5022-6534
Tray for 4 well plates, cooled, 1200	G1364-84521
Tray for 2 well plates, 10 funnels cooled, 1200	G1364-84522
Well plate tray, 2 well plates, 10 vials (supports 50 mm plates)	G2258-60011
Description	Part #
Filtration Supplies
HPLC Solvent filter/degasser assembly
Includes 250 mL glass reservoir, tapered funnel base with PTFE coated sieve, 1 L flask and clamp	3150-0577
Regenerated Cellulose Filter Membranes 47/45, 100/pk	3150-0576
Nylon Filter Membranes 47/45, 100/pk	9301-0895
PTFE Filter Membranes 47/45, 10/pk	3150-0509
Universal in-line filter Includes two frits, 4.8 mm, 2 μm pore size; filter holder with inserts; 130 x 0.25 mm connecting capillary	01090-68703
Low dispersion in-line filter
Includes two frits, 1.6 mm, 2 μm pore size; filter holder with inserts; 60 x 0.12 mm connecting capillary RRLC In-line filter	01090-68702
2.1 mm, 0.2 μm pore size filter, connecting capillary, max 600 bar RRLC In-line filter	5067-1551
4.6 mm, 0.2 μm pore size filter, connecting capillary, max 600 bar	5067-1553
Variable Wavelength Detector (VWD)
Deuterium lamp (1000 hours)	G1314-60100
Deuterium longlife lamp	2140-0813
Standard "D" flow cell kit Includes 2 windows, 2 gaskets #1, 2 gaskets #2	G1314-65050
Micro flow cell, 5 mm, 1μl, 40 bar	G1314-60081
Micro flow cell kit Includes 2 windows, 2 gaskets #1, 2 gaskets #2	G1314-65052
High pressure flow cell, 10 mm, 14 μl, 400 bar	G1314-60082
High pressure flow cell kit Includes 2 windows, 2 Kapton gaskets, 2 PEEK rings	G1314-65054
Diode Array Detector (DAD)
Deuterium lamp, shine-through	2140-0590
Deuterium longlife lamp	2140-0813
Deuterium longlife lamp with ID tag	2140-0820
Tungsten lamp assembly	G1103-60001
Column connecting capillary with fittings, 39 cm, 0.17 mm ID, 1/16 in. male/male	G1315-87311
Column connect capillary, 150 x 0.12 mm	G1315-87312
Memory Extensions
Compact Flash Card, 256 MB Use with G1315C and G1365C DAD	01100-68700
USB Memory Stick, 256 MB	G4208-68700
1600A Capillary Electrophoresis Supplies
System Parts
Description	Part #
Deuterium lamp	2140-0585
Electrolyte bottle, 500 ml	9300-1748
Pre-puncher	G1600-67201
Alignment Interface and Capillaries
Capillary cassette	G1600-60002
Standard fused silica capillary, 75 µm ID, 2/pk	G1600-61311
Alignment interface for standard capillary, 75, 100, 150 µm ID	G1600-60310
Extended light path capillary, 75 µm ID, 2/pk	G1600-61332
Alignment interface for extended light path capillaries, 75 µm ID	G1600-60330
Vials and Caps for CE
Crimp/snap top vial, 1ml, Polypropylene, 100/pk	5182-0567
Crimp/snap top vial, 300 µl, Polypropylene, 1000/pk	9301-0978
Clear wide opening crimp/snap top glass vial, 2 ml, 500/pk	5183-4623
Snap caps PUR (polyurethane for resealing), 500/pk	5042-6491
Snap caps PEO (polyethylene olefin for chemical resistance), 500/pk	5181-1513
High Sensitivity Detection Cell
Description	Part #
High sensitivity cell kit Includes detection cell, 75 µm ID inlet capillary (72 cm) and outlet capillary (8.5 cm) pair, capillary cassette, fittings (3 fitting screws with seals, 2 fitting caps), cleaning solution, CE Partner CD-ROM	G1600-68713
High sensitivity cell replacement kit Includes 75 µm ID inlet capillary (72 cm) and outlet capillary (8.5 cm) Pair	G1600-68716
CE Cell Fitting Kit Includes 3 fitting screws, 2 fitting caps	G1600-63200
CE Reagents
Ultra pure CE water, 500 ml 5062-8578
0.1  N sodium hydroxide for conditioning capillaries, 250 ml	5062-8575
1.0  N sodium hydroxide for conditioning capillaries, 250 ml	5062-8576
0.1  N phosphoric acid for conditioning capillaries, 250 ml	5062-8577
50 mM sodium phosphate buffer, pH 2.5, 250 ml	5062-8571
50 mM sodium phosphate buffer, pH 7.0, 250 ml ml	5062-8572
50 mM sodium tetraborate buffer, pH 9.3, 250 ml	5062-8573
20 mM sodium tetraborate buffer, pH 9.3, 100 ml	8500-6782
Solutions Kits for CE
Description	Part #
CE Operational Qualification Performance Verification (OQ/PV) Chemical Kit Includes buffer (20 mM borate, pH 9.3, 100ml), test samples (0.1, 0.5, 1.0, and 5.0 mM 4-(hydroxy)- 2 ml ea.), with methods, sequence, spectral library, and instruction manual.100 ml), test capillary (L 48.5 cm, I 40 cm, ID 50 µm), diskettecapillary conditioning solution (0.1 N sodium hydroxide,acetophenone,	5063-6515
Agilent CE Capillary Start-Up Kit Includes Extended Ligh Path capillary (L 64.5 cm, ID 50 µm), one standard capillary (I 56 cm, ID 50 µm), one test capillary (L 48.5 cm, I 40 cm, ID 50 µm), one Extended Light Path capillaries (ID 50 µmcapillaries (ID 50 µm), and one alignment interface for Agilentalignment interface for standard	G1600-68706
µPAGE starter kit, 3 capillaries, 100 µm	192-1311
Inorganic Anion Solutions Kit	5063-6511
Organic Acids Solution Kit	5063-6510
Forensic Anions Solutions Kit	5064-8208
Cation Solutions Kit	5064-8206