| 7500 ICP-MS Supplies |
|
| General Supplies |
|
| Rotary pump oil, 4L |
6040-0798 |
| Rotary pump oil, 1L |
6040-0834 |
| Filter for cooling water |
G1820-65018 |
| Polishing paper kit |
G1833-65404 |
| Electron Multiplier (ETP) |
5184-1983 |
| Electron Multiplier (HPK) |
G1833-65575 |
| Screws for skimmer base |
G1820-65435 |
| Cotton swab, ultra-fine cone bud shape, both ends |
9300-2574 |
|
|
|
|
| 7500a/i/s |
|
| Extraction Lens 1 |
G1833-65417 |
| Extraction Lens 2 |
G1833-65413 |
| Screw kit for Extraction Lens |
G1833-65024 |
| Omega Lens Assembly |
G1833-65418 |
| Screw kit for Omega Lens |
G1833-65025 |
| Stainless steel base for Nickel skimmer |
G1833-65407 |
| Brass base for Platinum skimmer |
G1833-65408 |
|
|
|
|
| 7500c |
|
| Extraction Lens |
G1833-65499 |
| Einzel Lens 1 |
G1833-65500 |
| Einzel Lens 2 |
G1833-65501 |
| Einzel Lens 3 |
G1833-65502 |
| Octopole |
G1833-65094 |
| Octopole Assembly (includes Cell Entrance/Exit without O-ring) |
G1833-65503 |
| Screw and Spacer Kit for Extraction Einzel Lens |
G1833-65578 |
| Screw kit for Reaction Cell |
G1833-65088 |
|
|
|
|
| 7500ce/cx |
|
| Extraction Lens 1 |
G3270-65028 |
| Extraction Lens 2 |
G3270-65029 |
| Omega lens |
G3270-65030 |
| Omega bias lens |
G3270-65031 |
| Octopole Assembly (includes Cell Focus, Cell Entrance/Exit, and QP Focus |
G1833-65134 |
| Screw and Spacer kit for Extraction & Omega Lens |
G3270-60639 |
| Screw and Spacer kit for Reaction Cell |
G1833-65138 |
|
|
|
|
| 7500cs |
|
| Extraction Lens 1 |
G1833-65592 |
| Extraction Lens 2 |
G1833-65593 |
| Omega Bias Lens |
G1833-65594 |
| Omega Lens |
G1833-65595 |
| Octopole Assembly (includes Cell Focus, Cell Entrance/Exit, and QP Focus |
G1833-65134 |
| Screw and Spacer kit for Ion Lens |
G1833-65125 |
| Screw and Spacer kit for Reaction Cell |
G1833-65138 |
|
|
|
|
| Interface Supplies |
|
| O-ring for sampling cone, Viton |
G1820-65025 |
| Nickel sampling cone |
G1820-65238 |
| Platinum sampling cone, 10 mm insert |
G1820-65239 |
| Platinum sampling cone, 18 mm insert |
G1820-65360 |
| Nickel skimmer cone |
G1820-65050 |
| Platinum skimmer cone |
G1820-65237 |
| Interface wrench for sampling cone |
G1833-65405 |
| Interface wrench for skimmer cone removal |
G1833-65079 |
|
|
|
|
| Torch Supplies |
|
| Torch, quartz 2.5 mm ID |
G1833-65423 |
|
|
|
|
| Torch, quartz 1.5 mm ID, taper type |
G1833-65424 |
|
|
|
|
| Bonnet (quartz ring for shield torch) |
G1833-65421 |
|
|
| Shield plate, long life |
G1833-65419 |
|
|
| Work Coil |
G1833-65432 |
|
|
| Inert torch, quartz, without injector |
G1833-65422 |
|
|
| Sapphire Injector for Inert Torch 2.0 mm ID |
G1833-65410 |
|
|
|
|
| Plasma and auxiliary gas line tubing, 2/pk 3.17 mm ID, 6.35 mm OD, 35 cm (plasma) 2.38 mm ID, 3.96 mm OD, 35 cm (aux) |
G3270-65021 |
|
|
|
|
| Connectors for plasma/aux gas lines, PTFE |
G1820-65027 |
|
|
| Inner sleeve for carrier/aux/blend gas line, 5/pk |
5042-0922 |
|
|
| Inner sleeve for plasma gas line,5/pk |
5042-0923 |
|
|
|
|
| Spray Chamber Supplies |
|
| Connector, quartz |
G1833-65426 |
|
|
| Clamps, 2/pk |
G1833-65430 |
|
|
| Spray chamber, quartz |
G1820-65337 |
|
|
| Spray chamber, polypropylene (sapphire tube) |
G1833-65463 |
|
|
|
|
| Nebulizer Supplies |
|
| MicroMist nebulizer |
G3266-65003 |
| Sample Tubing for MicroMist, 0.25 mm ID |
G3266-80010 |
| Sample Tubing for MicroMist, 0.5 mm ID |
G3266-80011 |
| PFA concentric nebulizer, 200 µl/min |
G3285-80000 |
| PFA concentric nebulizer with probe, 200 µl/min |
G3285-80001 |
| Babington nebulizer Includes Viton O-ring, PTFE sample tubing, and connector |
G1820-60453 |
|
|
|
|
| Sample tubing with connector, Teflon for Babington nebulizer, replace when heavily contaminated by high matrix samples |
G1820-65276 |
|
|
|
| Concentric nebulizer, quartz |
G1820-65138 |
|
|
| Sample tubing, PFA 0.5 mm ID, 1.6 mm OD, 5 m |
G1820-65105 |
|
|
|
|
| O-rings for end cap, Viton, 5/pk |
G1820-65198 |
|
|
| Carrier Gas line Connector for Babington nebulizer for 4mm tubing, includes ferrule and o-ring |
G1820-65214 |
|
|
|
|
| Connector for blend gas line, polypropylene, 2/pk |
G1820-65119 |
|
|
| Connector for carrier gas line, polypropylene for 4mm tubing, includes ferrule and o-ring |
G1820-65052 |
|
|
|
|
| Sample line connector includes Viton O-ring |
G1820-60160 |
|
|
|
|
| Tubing for carrier/blend gas, PTFE, 2/pk |
G1833-65414 |
|
|
| Inner sleeve for carrier/aux/blend gas line, 5/pk |
5042-0922 |
|
|
|
|
| Peristaltic Pump Supplies |
|
| Peri pump sample tubing, Tygon, 12/pk |
G1833-65569 |
| Peri pump drain tubing, Ismaprene, stronger stops, 12/pk |
G1833-65570 |
| Peri pump ISTD tubing, Tygon, 12/pk |
G1833-65571 |
| Online ISTD Addition Kit |
G1833-65071 |
| Drain tubing kit |
G1833-65411 |
| Peri pump sample tubing, Tygon, 1.02 mm ID, 40 cm, 12/pk |
G1833-65569 |
| Tygon tubing for y-connector 3 mm ID, 500 mm |
G1820-65104 |
|
|
|
|
| Gas Line Supplies |
|
|
|
| Connectors for plasma/aux gas lines, PTFE, 1/ea |
G1820-65027 |
|
|
| Inner sleeve for carrier/aux/blend gas line, 5/pk |
5042-0922 |
|
|
| Inner sleeve for plasma gas line, 5/pk |
5042-0923 |
|
|
| Connector for carrier gas line, PTFE for 4mm tubing, includes ferrule and o-ring |
G1820-65214 |
|
|
|
|
| Connector for carrier gas line, polypropylene for 4mm tubing, includes ferrule and o-ring |
G1820-65052 |
|
|
|
|
| Connector for blend gas line, polypropylene, 2/pk |
G1820-65119 |
|
|
|
|
| Installation and Checkout Standards |
|
|
|
| ICP-MS Checkout Solutions for 7500s system installation kit Contains tuning solution, dual mode (1), dual mode (2), abundance sensitivity (1), abundance sensitivity (2), detection limit solution, high sensitivity tune, wash, and water blank solutions |
5184-3564 |
|
|
|
|
| ICP-MS Checkout Solutions for 7500a/i/c system installation kit Contains tuning solution, dual mode (1), dual mode (2), wash, and water blank solutions |
5184-3565 |
|
|
|
|
|
| Tuning Solutions |
|
|
|
| Stock Tuning Solution Li, Y, Ce, Tl and Co; 100 mL, 10 mg/L; matrix=2% HNO3 |
5188-6564 |
|
|
|
|
| Tuning Solution Li, Y, Ce, Tl and Co; 2 x 500 mL, 10 µg/L; matrix= 2% HNO3 |
5184-3566 |
|
|
|
|
|
|
| Multi-Element Calibration Standards |
|
|
|
| Multi-Element Calibration Standard-1, 100 mL 10 mg/L of Ce, Dy, Er, Eu, Gd, Ho, La, Lu, Nd, Pr, Sc, Sm, Tb, Th, Tm, Y, Yb; matrix 5% HNO3 |
8500-6944 |
|
|
| Multi-Element Calibration Standard-2A, 100 mL 10 mg/L of Ag, Al, As, Ba, Be, Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Se, Sr, Tl, U, V, Zn; matrix 5% HNO3 |
8500-6940 |
|
|
| Multi-Element Calibration Standard-3, 100 mL 10 mg/L of Sb, Au, Hf, Ir, Pd, Pt, Rh, Ru, Te, Sn; matrix 10% HCI/1% HNO3 |
8500-6948 |
|
|
| Multi-Element Calibration Standard-4, 100 mL 10 mg/L of B, Ge, Mo, Nb, P, Re, S, Si, Ta, Ti, W, Zr; matrix |
8500-6942 |
|
|
|
|
| PA Tuning Solution Kit |
|
| 2 x 100 mL bottles Tuning 1: 20 ppm each of Zn, Be, Cd, As; 10 ppm each of Ni, Pb, Mg; 5 ppm each of Tl, Na, Al, U, Cu, Th, Ba, Co, Sr, V, Cr, Mn, Li6, Sc, In, Lu, Bi; 2.5 ppm each of Y, Yb; matrix matrix 10% HCl and 1% HNO with trace amounts of HFTuning 2: 10 ppm each of Mo, Sb, Sn, Ge, Ru, Pd; 5 ppm of Ti, Ir;2-5% HNO3 |
5188-6524 |
|
|
|
|
| Interference Check Mixes |
|
| 6020 Interference Check Solution A, 100 mL 20000 ppm of Cl; 3000 ppm of Ca; 2500 ppm each of Fe, Na; 2000 ppm of C; 1000 ppm each of Al, Mg, P, K, S; 20 ppm each of Ti, Mo; Matrix 5% HNO3 with trace amounts of HF |
5188-6526 |
|
|
| 6020 Interference Check Solution B, 100 mL 20 ppm each of Cr, Co, Cu, Mn, Ni, V; 10 ppm each of As, Cd, Se, Zn; 5 ppm of Ag; Matrix 5% HNO3 |
5188-6527 |
|
|
|
|
| Environmental Standards |
|
|
|
| Environmental Calibration Standard, 100 mL 1,000 mg/L of Fe, K, Ca, Na, Mg; 10 mg/L of Ag, Al, As, Ba, Be, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Tl, V, Zn, Th, U; matrix 10% HNO |
5183-4688 |
|
|
| Initial Calibration Verification Standard, 100 mL 1,000 mg/L of Fe, K, Ca, Na, Mg, Sr; 10 mg/L of Ag, Al, As, Ba, Be, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Tl, V, Zn, Th, U; matrix 5% HNO |
5183-4682 |
|
|
|
|
|
| Internal Standard Mix, 100 mL 100 ppm of 6Li, Sc, Ge, Rh, In, Tb, Lu, Bi; Matrix 10% HNO3 |
5188-6525 |
|
|
| Internal Standard Mix, 100 mL 10 mg/L of 6Li, Sc, Ge, Y, In, Tb, Bi; matrix 5-10% HNO3 |
5183-4681 |
|
|
| Environmental Spike Mix, 100 mL 1,000 mg/L of Fe, K, Ca, Na, Mg; 100 mg/L of Ag, Al, As, Ba, Be, Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Sb, Se, Tl, V, Zn, U; matrix 5% HNO |
5183-4687 |
|
|
|
|
| Electron Multipliers and Replacement Horn |
|
| Electron multiplier replacement horn |
05971-80103 |
| (5973, 5972, 5971/GCD) |
|
| High energy dynode (5973 only) |
G1099-80001 |
| Electron multiplier kit (5972, 5971/GCD only) |
05971-80102 |
![K'[Prime] Solutions](images/img_logo_kprime.jpg){kind=logo}
